1-15. Additional Equipment Required
The following chart lists additional equipment re-
Section III. SERVICE UPON RECEIPT
tic bag and cushioned within the carton with pre-
1-16. Packaging Data
formed plastic molding material. A typical packaging
The radio receiver, receiver control, and receiver
configuration with contents is shown in figure 1-4.
mount are individually packaged in separate weather-
The approximate exterior dimensions of the equip-
resistant corrugated fiberboard cartons with all seams
ment and boxes are provided in table 1-3.
and joints sealed with water-resistant, pressure-sen-
sitive tape. Each item is enclosed within a sealed plas-
Figure 1-4. Interface conversion group packaging diagram,
for receiving set, radio AN/ARN-123(V).
Figure 1-4. Packaging Diagram.