TB 9-2320-387-35-8
NOTE
Perform step 9-8 only if not installing cargo soft-top enclosure;
otherwise, skip to step 9-9.
9-8. Install antenna (13) on antenna mount assembly (3) with four capscrews (14), gasket (12), eight
lockwashers (15), and four nuts (16).
NOTE
Perform steps 9-9 through 9-11 only when installing cargo soft-top
enclosure.
9-9. Install cargo soft-top enclosure.
NOTE
Ensure all slack has been taken out of cargo soft-top enclosure
and that cargo soft-top enclosure has been properly installed.
9-10. Using antenna mount assembly (3) as template, locate, mark, and drill four 0.375-in. holes (18) and
cut "X" (19) in cargo soft-top enclosure (17).
9-11. Install antenna (13) on antenna mount assembly (3) and cargo soft-top enclosure (17) with
four capscrews (14), gasket (12), eight lockwashers (15), and four nuts (16).
9-12. Tighten nuts (16).
14
15
14
15
13
13
12
12
17
19
15
~
3
16
15
16
18
12.
GASKET A3013655-1 QTY. 1
13.
ANTENNA A3005031 QTY. 1
14.
CAPSCREW B1821BH038C150N QTY. 4
15.
LOCKWASHER MS45904-76 QTY. 8
16.
NUT 13218E0320-293 QTY. 4
Figure 5-62.
5-53
