RADIO RECEIVER TEST AND ANTENNA TEST.

TM 32-5892-206-10

b. Make recordings using the receiver(s) and microphone

as sources. Check the functions of the controls and indicators

c. Operate the unit in F/F and F/R modes (para. 2-9).

d. Reproduce the recordings (para. 2-9). Notice any

distortion, noise, wow, flutter, or other problems. Clean the tape

head and other elements again if necessary. Other problems

should be referred to organizational maintenance.

e. Rewind the tape to the beginning, reset the counter, and

advance the tape to a count of about 10. Turn the tape over and

set the mode selector switch to REPRODUCE. Observe the tape

as it plays and note any problems such as bent capstans,

binding, etc. When the end of the tape is encountered, the unit

should stop and sound a tone in the headset.

f. Be sure to set the mode selector switch to OFF after

testing the system.

3-33 RADIO RECEIVER TEST AND ANTENNA TEST.

a. Perform a battery check (para. 2-6a).

b. If possible, operate the receiver on each band, in each

reception mode, and with each antenna input. Be sure that all

the receiver controls work properly.

3-44