Figure 3-3. Monitor Only (Crew) Station (MOS)

TM 11-5830-263-20&P

CABLE TO FFCS,

CABLE FROM FFCS,

MCS, MOS OR RIT

HEADSET CABLE

Figure 3-3. Monitor Only (Crew) Station (MOS)

3.4.

MOS REMOVAL AND REPLACEMENT (Fig. 3-3)

a. MOS Removal

1. Disconnect and tag the following cables from the MOS: HEADSET and HIGHWAY

(connected to the STATION connectors).

2. Refer to Table 3-3 and it's corresponding figure at the end of this section and remove

mounting hardware securing the MOS.

3. Remove MOS.

b. MOS Replacement

1. Place MOS in position on studs or plate to be mounted.

2. Refer to Table 3-3 and it's corresponding figure at the end of this section for the proper

mounting sequence and secure MOS.

3. Reconnect the following cables to the MOS: HEADSET and HIGHWAY (connected to the

STATION connectors).

3-4