|
| TM 11-5830-263-20&P
CABLE TO FFCS,
CABLE FROM FFCS,
MCS, MOS OR RIT
MCS, MOS OR RIT
HEADSET CABLE
CABLE FROM VEHICLE
PTT SWITCH
3.3.
FFCS REMOVAL AND REPLACEMENT (Fig. 3-2)
a. FFCS Removal
1. Disconnect and tag the following cables from the FFCS: HEADSET, VEHICLE PTT SWITCH
(if used) and HIGHWAY (connected to the STATION connectors).
2. Refer to Table 3-2 and it's corresponding figure at the end of this section and remove
mounting hardware securing the FFCS
3. Remove FFCS and verify crewstation setting.
b. FFCS Replacement
1. Place correctly set FFCS in position on studs or plate to be mounted.
2. Refer to Table 3-2 and it's corresponding figure at the end of this section for the proper
mounting sequence and secure FFCS.
3. Reconnect the following cables to the FFCS: HEADSET, VEHICLE PTT SWITCH (if used),
and HIGHWAY (connected to the STATION connectors).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |