POST-INSTALLATION CHECKOUT

TM 11-5820-917-13

standby power for up to 24 hours (at 23C).

Refer to paragraphs 3-16 and 3-17

for additional information.

POST-INSTALLATION

CHECKOUT

2-26. The electrical performance of the receiver should be verified before being put

into normal operation. The performance test described in section 5 is performed as

the post-installation checkout and prior to operation.

STORAGE

AND

RESHIPMENT

2-28. STORAGE.

The maximum recommended storage conditions should not exceed

For long term storage, repackaging of the

equipment and sealing of the cables in moisture-proof bags are recommended. The

shutdown and storage procedures of paragraph 3-16 or 3-17 should be followed to

protect the standby battery supply.

2-29. RESHIPMENT. The environmental container offers adequate protection for

reshipment of the RCS-4B. The container has bottom rails to facilitate handling with

a forklift. The front and rear covers should be in place when moving the unit, and

extreme care should be taken to avoid damaging the instrument.