|
| |
TM 11-5820-890-30-5
18-7. OPERATIONAL CHECK. Continued
NOTE
An ECCM fill device is used to load FH data into the RT. There are 15 labels on the side of the fill
device that list information about the data that is stored in the fill device memory. Each label
represents a position where the data is stored. Specific data is selected by setting the fill device
SELECT switch to the label position of the desired data.
Fill Device Connected to Fill Device (Using Fill Cable)
Fill Device Connected Directly to Fill Device (Without Using Fill Cable)
Figure 18-1.
MX-10579/VRC or MX-18290/VRC Test Setup.
18-4
|
