| |
TM 11-5820-890-30-5
8-20. REPLACEMENT OF SEAL SCREW. Continued
ITEM
ACTION
REMARKS
INSTALLATION
c. Seal screw (16)
d. Battery box case (15)
8-21. REPLACEMENT
Tools:
Pocket knife
Expendable Supplies:
Adhesive
Obtain replacement seal screw.
Use torque screwdriver. Install seal screw
in case and torque to 9 in-lb.
OF DAMPENING TAPE GASKET.
ITEM
ACTION
REMARKS
REMOVAL
a. Two battery box cover
latches (32)
b. Battery box cover (1)
c. Dampening tape
gasket (3)
INSTALLATION
d. Dampening tape
gasket (3)
e. Battery box cover (1)
f. Two battery box cover
latches (32)
Release two twist lock latches securing
battery box cover (1) to battery box
case (15). See figure 8-3.
Position cover to allow access to
dampening tape gasket (3).
Use pocket knife. Remove and discard
defective dampening tape gasket.
Obtain replacement. Apply adhesive to
back of dampening tape gasket.
Install dampening tape gasket in cover.
Position cover to battery box case (15).
Fasten two twist lock latches securing
battery box cover to case.
8-17
|