|
| |
2-45. REPLACEMENT
TM 11-5820-890-30-5
OF RF CABLES 1W1 THROUGH 1W5. Continued
ITEM
ACTION
REMARKS
INSTALLATION Continued
f. RT bottom cover
Install.
Refer to paragraph 2-35
2-46.
Tools:
for installation of bottom
cover.
REPLACEMENT OF RT CHASSIS (1A16).
Flat tip screwdriver
Module extractor
Round nose pliers
Diagonal cutting pliers
Torque screwdriver
Cross tip screwdriver
References:
Paragraph 2-34 for use of module extractor.
Paragraph 2-35 for removal and installation of RT covers.
Paragraphs 2-36 through 2-44 for removal and installation of all RT modules.
Paragraph 2-45 for removal and installation of RF cables.
Paragraph 2-49 for removal and replacement of RT front panel.
Figure 2-15 for location of RT modules.
Figure 2-17 for location of RF cables.
ITEM
ACTION
REMARKS
REMOVAL
a. RT top cover
Remove and retain.
Refer to paragraph 2-35 for
removal of top cover.
b. RT bottom cover
Remove and retain.
Refer to paragraph 2-35 for
removal of bottom cover.
c. Two hub cover captive
Use flat tip screwdriver. Fully loosen.
screws
d. Hub cover
Remove and retain.
e. Cable ties
Use diagonal cutting pliers. Remove any
cable ties securing RF cables.
f. RF cables (1W1 through
Use round nose pliers. Remove and
Refer to paragraph 2-45
1W5)
retain all RF cables.
for removal of RF cables.
See figure 2-17 for cable
locations.
g. Modules (1A1 through
Where necessary, use module extractor,
Refer to paragraph 2-34 for
1A15)
round nose pliers, and flat tip screw-
use of module extractor.
driver. Remove and retain all modules.
Refer to paragraphs 2-36
through 2-44 for removal of
modules. See figure 2-15
for module locations.
2-171
|
