Load Single Channel Frequencies into RT (Primary Operator Task 1)

TM 11-5820-890-10-8

5.4d. Load Single Channel Frequencies into RT (Primary Operator Task 1)

The SINCGARS operator is required to perform this task in preparation

DESCRIPTION

for the employment of single channel communications, participation in

Cold Start net openings, use of the CUE and ERF method of late net

entry, and for single channel frequency updates. The operator

determines the required single channel frequencies from the ANCD or

another source. These frequencies are then loaded into the radio by

use of the RT keyboard.

Operators perform the actions shown for each subtask, in the order

DETAILED FLOWCHART

shown below. Results are shown as ANCD display messages (dark

bordered boxes) or as RT display messages in the form of "Display

shows."

LOAD SINGLE CHANNEL FREQUENCIES INTO RT

ACTIONS

RESULTS

SUBTASKS

(1) Turn ANCD ON

select:

a. Obtain required CUE, MAN,

Soi Radio sUpervisor

and/or SC freqs

(2) Enter SOI

qRef Group Net sufX Pyro

Tmpd Set C/s Find Memo

(3) Enter TMPD

Enter Time Pd:

=> ##

(4)

Select time period desired

qRef Group Net sufX Pyro

Tmpd Set C/s Find Memo

(Scroll to net desired; note SC

(5) Enter QREF

freqs needed.)*

(1)

Set COMSEC to PT

b. Prepare RT for SC freq

N/A

loading

(2)

Set MODE to SC

(3)

Set FCTN to LD

(4)

Set CHAN to CUE, MAN, or

CHAN 1-6

5-30