Figure 5-1 3. ASIP RT Connectors

TM 11-5820-890-10-8

Connectors, ASIP RT

This connector provides RT power and signaling interfaces

P1 (System)

Figure 5-1 3. ASIP RT Connectors

J6 (Auxiliary)

Used to connect HRCRD handset and two-wire adapter.

J5 (GPS)

Enables a PLGR to be connected to a manpack radio.

J3 (AUD/DATA)

The J4 (AUD/DATA) connector supports general data communications at

SINCGARS Data Rates of 600, 1200, 2400, 4800 and 16,000 BPS and

Enhanced Data Rates of 1200N, 2400N, 4800N, and 9600N BPS. The

RS-232 interface allows transmission of data via SINCGARS ASIP radios

using computers and commercial "Xmodem" software. If not using Packet

(PCKT) data mode, or the internet controller (INC) feature of the ASIP radio,

all data devices must be connected to the AUD/DATA port, not to the ASIP

VAA.

J2 (AUD/FILL)

Handsets used with the ASIP RT may be connected to the AUD/DATA or

AUD/FILL connector. (NOTE: Handsets will not function if connected to the

front of the ASIP VAA.)

J1 (Antenna)

RF Input/Output

5-16