Figure 5-12. SIP RT Connectors

TM 11-5820-890-10-8

Connectors, SIP RT

P1 (System)

The P1 systems connector is located on the back of the SIP RT. This

connector provides RT power and signaling interfaces.

Figure 5-12. SIP RT Connectors

J5 (GPS)

Located on the back of the SIP RT the GPS J5 connector provides an

interface of the VAA GPS connector.

J4 (AUD/DATA)

The J4 (AUD/DATA) connector supports general data communications at

SINCGARS Data Rates of 600, 1200, 2400, 4800 and 16,000 BPS and

Enhanced Data Rates of 1200N, 2400N, 4800N, and 9600N BPS. The

RS-232 interface allows transmission of data via SINCGARS SIP radios

using computers and commercial "Xmodem" software. If not using Packet

(PCKT) data mode, or the internet controller (INC) feature of the SIP radio, all

data devices must be connected to the AUD/DATA port, not to the SIP VAA

J3 (AUD/FILL)

Handsets used with the SIP RT may be connected to the AUD/DATA or

AUD/FILL connector. (NOTE: Handsets will not function if connected to the

front of the SIP VAA.)

5-15