|
| TM 11-5820-890-10-8
SlP/ASIP RT Keypad
General
The keypad of the SlP/ASlP radio is similar to that of earlier versions except
four of the keys have been given new designations: RCU, GPS, SA, and CID.
The ASIP keypad adds a MENU and Backlight function. Each is explained
below.
The RCU key is used to select operating mode options of RT, RCU, EXT, or
RCU/(2)
LDE. RT is the normal employment of the RT as a receiver-transmitter.
Selecting RCU allows the SlP/ASlP RT to be used as a remote control
device. EXT, is a capability of the SlP/ASlP radio that allows the radio to be
controlled externally via the system connector. The ASIP radio is
automatically in EXT when proper Interface and software IS detected.
Selecting EXT disables the front panel controls of the RT. EXT is used for
GRM - 122 testing. LDE stands for local data entry and represents a future
capability of the SlP/ASlP RT to communicate with SlP/ASlP VAA regarding
data loads and requirements. This feature is currently not used.
GPS/(5)
Represents a capability of the SINCGARS SlP/ASlP radio.
SA/(6)
Represents a capability of the SINCGARS SlP/ASlP radio.
Represents a capability of the SINCGARS SlP/ASlP radio.
CID/(8)
CLR/MENU
MENU appears on SINCGARS ASIP when key is pressed. Multiple presses
will scroll MENU.
FREQ/BACKLIGHT
ASIP radio must be in SQ ON, press key [FREQ], then CHG to change
intensity.
5-14
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |