INSTALLATION-continued - TM-11-5820-670-300255

TM 11-5820-670-30

2-43. A3000 MODULES AND ASSEMBLY REPLACEMENT. (CONT)

NOTE

Modules FL3001 through FL3005 are secured with locknuts and are soldered to printed

circuit board. Steps 2, 3, and 4 are typical for all modules.

Module location is stamped on board.

2. Position module (10) on board and install locknuts (11).

3. Using wrench, tighten locknuts (11).

CAUTION

Care must be taken when performing next step to prevent damaging printed circuit

board.

4. Using soldering iron, solder pins (12) of module to printed circuit board.

2-163