ALINEMENT PROCEDURE - TM-11-5820-401-34-30484

TM 11-5820-401-34-3/0967-LP-432-3060

A5200 SQUELCH AMPLIFIER ALINEMENT, NEW SQUELCH LEVEL. (CONT)

5-25.

CONTROL AND SWITCH SETTINGS (CONT)

POSITION/SETTING

CONTROL OR SWITCH

EQUIPMENT

OPERATE

OPERATE/OFF/STAND BY

AN/URM-103

15 Hz

FUNCTION

BAND SWITCH

30.00

RF TUNING

DEVIATION RANGE KHZ

LO, 0-10 KUV

RF OUTPUT

Fully counterclockwise

DEVIATION

Adjust until needle on IF UV RF

RF SET TO LINE

SET TO LINE meter is over red line

20 v

LO RF UV

ALINEMENT PROCEDURE

NOTE

Check the frequency counter to make sure that the signal generator is outputting exactly

30 MHz. The rf level must be increased temporarily to enable the frequency counter to

display. Adjust the AN/URM-103 RF TUNING control as necessary, reset to 20-v rf

level; then disconnect the T-connector from the counter.

5-120