|
| TM 11-5820-401-34-3/0967-LP-432-3060
2-20. A5000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)
NOTE
Shield (8) does not have to be removed in order to replace K5001 and K5002 modules.
Steps for removing K5001 and K5002 modules are the same.
11. Using screwdriver, remove screw (9), flat washer (10), and holddown (11).
12. Carefully pull module (12) from receptacle (13).
INSTALLATION
NOTE
If modules were not removed from assembly, proceed to step 11.
Steps for installing K5001 and K5002 modules are the same.
Module number location is stamped on board.
1. Carefully position module (12) in receptacle (13) and push into place.
2. Install holddown (11), flat washer (10), and screw (9).
3. Using screwdriver, tighten screw (9).
2-43
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |