INSTALLATION-continued - TM-11-5820-401-34-30072

TM 11-5820-401-34-3/0967-LP-432-3060

2-18.

A3000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)

INSTALLATION (CONT)

NOTE

Modules FL3001 through FL3005 are secured with locknuts and are soldered to printed

circuit board. Steps 3, 4, and 5 are typical of all modules.

Module number locations are stamped on board.

3. Position module (1) on board and install locknuts (2).

4. Using wrench, tighten locknuts (2).

CAUTION

Care must be taken when performing next step to prevent damage to printed circuit

board.

5. Using soldering iron, carefully solder pins (3) of module to printed circuit board.

2-32