INSTALLATION-continued - TM-11-5820-401-34-30073

TM 11-5820-401-34-3/0967-LP-432-3060

A3000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)

2-18.

CAUTION

Before installing modules, make sure pins on assembly are not bent. Straighten any

bent pins.

Care must be taken when performing next step to prevent damage to pins on assembly.

NOTE

Modules A3100 through A3700 are secured with captive screws. Steps 6 and 7 are

typical for all modules.

Module number location is stamped on board.

6. Carefully position module (4) on pins (5) and push into place.

7. Using screwdriver, tighten captive screws (6).

8. Connect black wire (W203) to A3300 (7), red wire (W204) to A3700 (8), green wire (W202/

W402) to FL3002 (9), and all wires to wire clips.

9. Position shield (10) under board and aline with pins.

10. Secure shield (10) by pushing in five slide clips (11).

2-33