INSTALLATION - TM-11-5820-401-34-30071

TM 11-5820-401-34-3/0967-LP-432-3060

A3000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)

2-18.

11. Using screwdriver, loosen two captive screws (9).

CAUTION

Care must be taken when performing next step to prevent damage to pins on assembly.

12. Carefully pull P3001 (10) off pins (11).

13. Disconnect black wire (W203) from A3300 (12), red wire (W204) from A3700 (13), green wire

(W202/W402) from FL3002 (14), and all wires from wire clips.

14. Using jeweler's screwdriver, remove C-clip (15) from pin (16) and remove brace.

15. Using pliers, pull hinge pin (17) out of hinge.

16. Remove assembly (18).

INSTALLATION

CAUTION

Before installing assembly, make sure pins (11) are not bent. Straighten any bent pins.

1. Position assembly (18) in hinge and insert hinge pin (17).

2. Position brace (19) on pin (16) and install C-clip (15).

NOTE

If modules were not removed from assembly, proceed to step 8 for installation of

assembly.

2-31