 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  TM 11-5820-401-34-3/0967-LP-432-3060
A3000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)
2-18.
REMOVAL (CONT)
NOTE
Modules A3100 through A3700 are secured with captive screws. Steps 4, 5 and 6 are
typical for all modules.
Disconnect black wire (W203) from A3300 (1) and red wire (W204) from A3700 (2).
4.
5.
Using screwdriver, loosen captive screws (3).
Carefully pull module (4) off board to release from pins. Do not twist from side to side.
6.
NOTE
Modules FL3001 through FL3005 are secured with locknuts and are soldered to printed
circuit board. Steps 7 through 10 are typical for all modules.
Disconnect green wire (W202/W402) from FL3002 (5).
7.
Using wrench, remove locknuts (6).
8.
CAUTION
Care must be taken when performing next step to prevent damage to printed circuit
board.
9.
Carefully pull module (8) off board.
10.
2-30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals