TB 9-2320-387-35-8
NOTE
Perform steps 2-8 through 2-13 if inserts are not installed in
tunnel floor.
2-8. Remove three existing rivets (13) from tunnel floor (10).
2-9. Locate and mark three holes (11) in tunnel floor (10).
2-10. Enlarge three holes (15) in tunnel floor (10) to 0.391-in.
2-11. Drill three 0.531-in. diameter holes (11) in tunnel floor (10).
2-12. Install three inserts (12) in tunnel floor (10).
2-13. Install three inserts (14) in tunnel floor (10).
11
12
10
13
14
~
7.00
11
C
L
11
15
12. INSERT 12446871-16 QTY. 3
14. INSERT 12446871-5 QTY. 3
Figure 5-5.
5-5