Section III. SINCGARS MOUNTING TRAY, AMP GUARD, AND FBCB2 COMPONENTS INSTALLATION

TB 9-2320-387-35-6

3-24. Remove paint from four mounting holes (61) on integrated rack (4). Apply antiseize compound as

required.

3-25. Remove paint from four mounting holes (60) on MT-6352/VRC mounting base (59). Apply antiseize

compound as required.

NOTE

Two lockwashers and nuts are used on driver's side screws only.

3-26. Mount MT-6352/VRC mounting base (59) and amp guard (63) on integrated rack (4) with two

screws (56), four lockwashers (57), and two nuts (62). Secure mount MT-6352/VRC mounting base (59)

on integrated rack (4) with two capscrews (58) and lockwashers (57).

3-27. Place warning decal (64) on amp guard (63).

56. CAPSCREW B1821BH031F125N QTY. 2

57. LOCKWASHER MS45904-72 QTY. 6

58. CAPSCREW B1821BH031F100N QTY. 2

59. MOUNTING BASE, MT-6352/VRC A3013367-1 QTY. 1

62. NUT 9418892 QTY. 2

63. AMP GUARD 872842-1 QTY. 1

64. DECAL 861868-2 QTY. 1

Figure 5-22.

5-22

Privacy Statement
Press Release
Contact