 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  TB 9-2320-280-35-2
17-11. Install antenna overcab mount (6) on left overhead rail (8) and right overhead rail (9) with seven
capscrews (18) and lockwashers (19), omitting left side screw and lockwasher (third from top).
Tighten lower left rail and right rail capscrews (14) to B-pillar. (Refer to figures 5-57 and 5-58.)
18
6
19
9
8
19
18
Figure 5-59.
17-12.
Remove paint from vicinity of left overhead rail hole (10). Apply antiseize compound as required.
17-13.
Fabricate ground strap (23) from 6-in. length of braided wire and two terminal lugs.
17-14.
Install ground strap (23) on left overhead rail (8) with capscrew (18) and two lockwashers (19).
17-15.
Locate, mark, and drill 0.281-in. diameter hole (20) in antenna overcab mount (6).
17-16.
Remove paint from vicinity of antenna overcab mount hole (20). Apply antiseize compound as required.
17-17.
Install ground strap (23) on antenna overcab mount (6) with capscrew (24), two lockwashers (19),
washer (21) and nut (22).
18. CAPSCREW B1821BH025C100N QTY. 8
19. LOCKWASHER MS45904-71 QTY. 10
20
21. WASHER 2436161 QTY. 1
8
22. NUT 9419143 QTY. 1
23. GROUND STRAP
6
BRAIDED WIRE AA59569F30T0375 QTY. A/R
10
TERMINAL LUG MS20659-141 QTY. 2
24. CAPSCREW B1821BH025C075N QTY. 1
8
5.00
2.00
20
10
21 22
18
24
19
19
19 23
Figure 5-60.
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals