|
| TB 9-2320-280-35-1
Section XXIV. DVE A-FRAME CABLE GUIDE AND PAN AND TILT MODULE
(PTM) MOUNT ASSEMBLY INSTALLATION
24-1.
Remove two screws (2), nuts (4), and clamps (1) from A-frame pillar flange (5). Retain hardware.
24-2.
Locate and mark cutout area (3) on A-frame pillar flange (5).
24-3.
Cut out area (3) of A-frame pillar flange (5). Use fine mill file or crocus cloth to remove all burrs
and sharp edges.
CENTERLINE
OF VEHICLE
2
1
2
3
1
7.62
~
6.50
4
00
1.
5
4
Figure 5-79.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |