Section XXIII. DVE PAN AND TILT MODULE (PTM) MOUNT ASSEMBLY PREPARATION AND PILLAR MOUNT INSTALLATION

TB 9-2320-280-35-1

Section XXIII. DVE PAN AND TILT MODULE (PTM) MOUNT ASSEMBLY PREPARATION

AND PILLAR MOUNT INSTALLATION

23-1. Remove four existing screws (3) and existing center windshield retainer (2) from center windshield

frame (1). Retain three screws (3).

23-2. Using PTM mount assembly as template, locate, mark, and drill four 0.391-in. holes (5) on A-frame

pillar flange (6).

23-3. Enlarge hole (7) to 0.391-in. on center windshield frame (1).

23-4. Install one rivet nut (4) on center windshield frame (1) and four rivet nuts (4) on A-frame pillar

flange (6).

23-5. Install PTM A-pillar mount (8) on center windshield frame (1) with three existing screws (3).

4. RIVET NUT 3221003-14 QTY. 5

8. PTM A-PILLAR MOUNT 3221002-1 QTY. 1

Figure 5-78.