|
| TB 9-2320-280-35-1
NOTE
PLGR power cable positive lead insulation is ribbed.
13-31. Attach shrink tubing (44) and terminal lugs (47) and (42) to PLGR power cable negative lead (46)
and PLGR power cable positive lead (45). (Refer to TM9-2320-280-20 or TM 9-2320-387-24 for
terminal connector repair.)
13-32. Attach PLGR power cable positive lead (45) to 24-volt terminal board (49), located on cab enclosure
panel (34), with existing nut (43).
13-33. Attach PLGR power cable negative lead (46) to ground strap (48), located on cab enclosure
panel (34), with existing nut (43).
13-34. Coil excess positive and negative power leads (45) and (46), place beneath ground strap (48), and
secure with tiedown strap (40).
43
42
44
34
45
40
~
49
48
43
47
46
44
40.
TIEDOWN STRAP MS3367-1-0 QTY. A/R
42.
TERMINAL LUG 7728780 QTY. 1
44.
SHRINK TUBING MS23053/4-302-0 QTY. A/R
47.
TERMINAL LUG 7728777 QTY. 1
Figure 5-41.
5-34
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |