COMMON TOOLS AND EQUIPMENT.

TB 11-5820-890-12

4-1. COMMON TOOLS AND EQUIPMENT.

For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)

applicable to your unit.

4-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.

No special tools and support equipment are required for unit maintenance of the ANCD.

4-3. REPAIR PARTS.

Repair parts are listed in Appendix F. Order repair parts from TM 11-5810-394-14&P.

4-4.

SERVICE UPON RECEIPT OF MATERIAL

CAUTION

Do not thrust pointed or sharp tools or instruments into the interior of the carton.

NOTE

The only service upon receipt responsibilities assigned to Unit Maintenance personnel are those outlined

in paragraphs 4-4a through d. Should your operation require any servicing or adjustment, have the higher

headquarters automation/ signal officer do the work.

Unpacking/Repacking. Use the following procedure to unpack the ANCD. When repacking is necessary,

reverse the unpacking procedure. See Table 2-1.

NOTE

Prior to unpacking the equipment, check the carton for breaks, which may indicate possible interior

damage. If damage is found, report the damage on an SF 361, Transportation Discrepancy Report, as

directed in AR 55-38, Reporting of Transportation Discrepancies In Shipments.

When opening the shipping carton to remove the ANCD, check the equipment against the packing slip to

see if the shipment is complete. Report all discrepancies on an SF 364, Report of Discrepancy, as

directed in AR 735-11-2, Reporting of Item and Packaging Discrepancies.

Inspection. immediately after unpacking the ANCD, make a careful physical and visual inspection as follows:

4-2