INSPECTION PROCEDURE AND DAMAGE REPORT.

TB 11-5820-890-12

Table 2-1. ANCD List of Packing Materials

2-8. INSPECTION PROCEDURE AND DAMAGE REPORT.

Inspect the carton(s) for dents and/or damage, report the results to a superior or supervisor In charge if

damages are noted. Do not unpack the unit until authorized.

Unpack the ANCD unit while following the packing method illustration and list of materials, see Figure 2-4. Do

not damage the packing materials; they should be stored in the carton in case the ANCD will be stored or

shipped at a later date.

Once the ANCD is exposed, perform a visual inspection of the housing assembly. Inspect the housing for

cracks. Check the fill connector and CIK and it's socket for damage. Open the display cover, check the Liquid

Crystal Display (LCD) for cracks and the keyboard for damage. Report any discrepancies noted to a supervisor.

2-9. PRE-INSTALLATION.

Unit level maintenance personnel must perform the following prior to placing the ANCD at its system location.

Open the display, press the ON/OFF key. If the display turns on, the ANCD has a battery and application

software installed. The unit is ready for operation. If the display does not come on, proceed to step 2.

2-9