|
| PPP-B-636, grade W5c. Place the technical literature,
material handling equipment. Closure and strapping
packaged as specified in (a) above, on top of the con-
shall be in accordance with the applicable container
tents, directly under the lid of the box. Close the box
specification or appendix thereto except that metal
in accordance with the appendix of the box specifica-
strapping shall conform to QQ-S-781, type 1, class
tion.
B.
b. Level C. The radio sets shall be packaged in a
b. Level B.
manner that will afford adequate protection against
(1) Palletized load. A quantity of radio sets,
physical and environmental damage during ship-
packaged as specified in 1 above, shall be palletized
ment, handling, limited intransit storage.
as specified in a (1) above.
2. Packing. Packing shall be level A, B, or C as
(2) Less than palletized load. When quantities
specified. Shipping containers for all levels shall
per destination are less than a pallet load, a quantity
be capable of stacking and supporting superimposed
of radio sets, packaged as specified in 1 above, shall
loads during shipment and storage without dam-
be packed within a close-fitting fiberboard box con-
aging the container(s) or its contents.
forming to PPP-B-640, class 2, style E, or PPP-B-
a. Level A.
636, type CF. class weather-resistant, variety DW.
(1) Palletized load. A quantity of radio sets pack-
The gross weight of boxes conforming to PPP-B-640
aged as specified in 1 above, shall be placed on a
shall not exceed 250 pounds. When the gross weight
pallet, load type 1, conforming to MIL-STD-147 ex-
exceeds 200 pounds, or the container length and
cept that the pallet shall be softwood conforming to
width is 48 x 24 inches or more and the weight ex-
NN-P-71, type IV, size 2. A fiberboard cap shall be
ceeds 100 pounds, containers will be pallet-mounted
employed over the load having two sides extending
on pallets conforming to NN-P-71, type IV. Closure
down the stacked load at least 12 inches to accom-
shall be in accordance with the appendix of the ap-
modate marking requirements. The cap shall be
plicable box specification. Reinforcing shall be
fabricated of fiberboard conforming to PPP-F-320,
pressure-sensitive filament tape banding or non-
class weather-resistant. W5s or V3c. The load shall
metallic strapping conforming to PPP-T-97, type
be "bonded" to the pallet by strapping.
IV and PPP-S-760, type 11, respectively; selection of
(2) Less than palletized had. When quantities
the material and application shall be in accordance
per destination are less than a pallet load, the item
with the appendix of the applicable box specification.
packaged as specified in 1 above, shall be water-
c. Level C.
proofed, with tape conforming to PPP-T-76, in ac-
(1) Palletized load. Q quantity of radio sets,
cordance with the taping requirements of the box
packaged as specified in 1 above, shall be palletized
specification. A quantity of the waterproofed con-
as specified in a (1) above, except that the fiber-
tainers shall be packed within a close-fitting box
board caps shall be class domestic.
conforming to PPP-B-601, oversea type; PPP-B-621,
(2) Less than palletized bad. When quantities
style 4, class 2; or PPP-B-585, style 2 or 3, class 3.
per destination are less than a pallet load, a quan-
When the gross weight exceeds 200 pounds, or the
tity of radio sets, packaged as specified in 1 above,
container length and width is 48 x 24 inches or more
shall be packed as specified in b (2) above, except
and the weight exceeds 100 pounds, 3 x 4 inch skids,
that the fiberboard boxes shall conform to PPP-B-
laid flat, shall be applied in accordance with the re-
640 and PPP-B-636, class 1 and class domestic, re-
quirements of the container specification, or if not
spectively, and reinforcing shall not be required for
specified in the specification, in a manner which will
boxes conforming to PPP-B-636.
adequately support the item and facilitate the use of
APPENDIX D
STORAGE QUALITY ASSURANCE PROVISIONS
1. Index Number. The fourdigit index number of
a. Acceptance Quality Level (AQL). The nominal
this storage quality assurance provision (SQAP)
value expressed in terms of percent defective or de-
fects per 100 units, whichever is applicable, speci-
(reserved for future use in automatic data process-
fied for a given group of defects of a product. It is
ing) will be assigned when available,
the maximum allowable accidental departure from
2. Federal Stock Number. Each item listed in ap-
pendix B, with its Federal stock number is subject
specification requirements which can be tolerated.
b. Storage Quality Level (SQL). That quality level -
to the provisions of this SQAP.
applicable to storage sampling inspection expressed
3. Definitions. Special terms used in this SQAP
in terms of percent defective or defects per 100
are defined as follows:
4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |