|
| APPENDIX C
PRESERVATION, PACKAGING, AND PACKING
variety SW, grade 275. Close the box with tape con-
1. Preservation and Packaging. Preservation and
forming to PPP-T-45. Blunt all corners of the box
packaging shall be level A or C as specified.
and cover any exterior stapling or stitching with
a. Level A.
tape conforming to PPP-T-45. Place the box within
(1) Cleaning. Each radio set shall be cleaned in
a close-fitting barrier bag fabricated of material
accordance with the applicable procedure of MIL-
conforming to MIL-B-131, class 1. Exhaust the ex-
P-116.
cess air from the bag and heat-seal the closure.
(2) Drying. Each radio set shall be dried in ac-
Place the sealed bag with contents within a close-
cordance with the applicable procedure of MIL-P-
fitting fiberboard box conforming to PPP-B-636,
116.
type CF, class weather-resistant, grade W5c. Cover
(3) Preservation application. None required.
any interior stapling or stitching of the box with
(4) Unit packaging. Unit packaging shall be in ac-
tape conforming to PPP-T-45. Close the box in ac-
cordance with the methods prescribed in MIL-P-
cordance with the appendix of the box specification.
116 as specified herein.
(d) Mounting MT-2659/ARC. Each mounting
(a) Technical literature. Technical literature
shall be individually packaged method 111 as fol-
shall be packaged method lC-1 of MIL-P-116.
lows: Cushion the mounting by wrapping in paper-
board conforming to PPP-P-291, type 1, and secure
51X or Radio Receiver-Transmitter RT-742( )/ARC-
with gummed paper tape conforming to PPP-T-45,
dividually packaged method 1A-14 as follows:
type 111, grade A, Place the cushioned item within
a close-fitting box conforming to PPP-B-636, type
Cushion the unit on all surfaces with cells or pads
CF, class weather resistant, grade W5c. Close the
or both fabricated from fiberboard conforming to
PPP-F-320, type CF, class domestic, variety SW,
box in accordance with the appendix of the box spec-
ification.
grade 275, designed to protect all projections and ab-
(e) Cooler, Air, Electronic Equipment HD-615/
sorb the shock of impact in handling and transit.
ARC-51X. Each external blower shall be individually
Place the cushioned unit within a close-fitting fiber-
packaged method lC-1 as follows: Cushion the item
board box conforming to PPP-B-636, type CF, class
domestic, variety SW, grade 275. Close the box with
by wrapping in paperboard conforming to PPP-P-
291, type 1, and secure with gummed paper tape
tape conforming to PPP-T-5. Blunt all corners of the
conforming to PPP-T-45, type 111, grade A. Place
box and cover any exterior stapling or stitching with
the item within a close-fitting bag conforming to
tape conforming to PPP-T-45. Place the box within
MIL-B-117, type 11, class c and heat seal the closure.
a close-fitting barrier bag fabricated of material
Place the bagged item within a close-fitting box con-
conforming to MIL-B-131, class 1. Exhaust the ex-
forming to PPP-B+36, W5c or MIL-B-43014. Close
cess air from the bag and heat-seal the closure.
Place the sealed bag with contents within a close-
the box in accordance with the appendix of the box
fitting fiberboard box conforming to PPP-B-636,
specification.
type CF, class weather-resistant, grade W5c. Cover
(f) Indicator, Standing Wave Ratio ID-1003/
ARC. Each indicator shall be individually packaged
any interior stapling or stitching of the box with tape
method IIc as follows: Wrap the indicator with bar-
conforming to PPP-T-45. Close the box in accordance
with the appendix of the box specification.
rier material conforming to MIL-B-121, type II, class
2 and secure with gummed paper tape conforming to
(c) Radio Set Control C-4677/ARC-51Xor Radio
PPP-T-45, type 111, grade A. Cushion the indicator
Set Control C-6287/ARC-51BX. Each radio set con-
by wrapping in cellulosic cushioning material con-
trol shall be individually packaged method 1A-14
forming to PPP-C-843, type 111, class B. Place the
as follows: Wrap each unit with barrier material
conforming to MIL-B-121, type II, class 2. Seal the
cushioned item within a closefitting barrier bag
fabricated of material conforming to MIL-B-131,
wrap with tape conforming to PPP-T-45, type 111,
class 1. Exhaust the excess air from the bag and
grade A. Cushion each unit by wrapping in a mini-
heat seal the closure.
mum of two full layers of cushioning material con-
forming to PPP-C-843, type II, class B, designed to
(g) Radio Set AN/ARC-51X or Radio Set AN/
protect all projections and to absorb the shock of
ARC-51BX. Components of each radio set shall be
impact in handling and transit. Place the cushion-
packaged in accordance with the procedures spe-
ed unit within a close-fitting fiberboard box con-
cified in (b) through (f) above; and shall be con-
forming to PPP-B-636, type CF, class domestic,
solidated within a close-fitting box conforming to
3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |