Flag Test, Functioning

TM 11-6625-924-14

sight and stops, the flag circuit is operating properly.

stator terminals, indicates a null for each setting, B304

is correctly calibrated.

5-13. Annunciator Test, Functioning

5-12. Flag Test, Functioning

In this test, current from the test panel (BRIDGE SEL

switch in the ANNUN CUR + or ANNUN CUR - posi-

In this test, current from the test panel (BRIDGE SEL

tion) is applied through the annunciator circuit of the

switch in the FLAG CUR position) is applied through

indicator and causes the annunciator to operate in the

the flag circuit of the indicator and causes the flag of

dot or cross direction. If the current in each case is be-

the indicator to operate. If the meter indicates 280

tween 140 and 230 microampere, the annunciator cir-

microampere or more when the flag starts to move,

cuit is operating properly.

and 430 microamperes 30 when the flag goes out of

5-2