Special Information - TM-11-5895-532-20P0004

TM 11-5895-532-20P

Code

Application Explantion

h. Quantity Incorporated In Unit. Indicates the

complete repair of the support item is the depot

quantity of the item used in the breakout shown on the

level.

illustration figure, which is prepared for a functional

Z-

Nonreparable. No repair is authorized.

group, subfunctional group, or an assembly.

(3) Recoverability code. Recoverability codes

are assigned to support items to indicate the disposition

4. Special Information

action on unserviceable items. The recoverability code is

a. Usable on codes are shown in the description

entered in the fifth position of the Uniform SMR Code

column. Uncoded items are applicable to all models.

format as follows:

Identification of the usable on codes used in this

publication are:

Recoverability

Codes

Definition

Code

Used On

Z-

Nonreparable item.

When unserviceable,

ASJ

AN/TPX-46(V)1

condemn and dispose at the level indicated in

CLD

AN/TPX-46(V)2

position 3.

CLE

AN/TPX-46(V)3

Reparable item.

When uneconomically re-

CLG

AN/TPX-46(V)4

parable, condemn and dispose at organizational

CLF

AN/TPX-46(V)6

level.

b. The following publication pertains to the AN/ TPX-

H-

Reparable item.

When uneconomically re-

46(V)1, 2, 3, 4, and 6 and its components: TM 11-5895-

parable, condemn and dispose at the general

532-12, Interrogator Sets AN/TPX-46(V)1, 2, 3, 4, and 6.

support level.

c. Action change codes indicated in the left-hand

D-

Reparable item. When beyond lower level repair

margin of the listing page denote the following:

capability, return to depot. Condemnation and

N- Indicates an added item.

disposal not authorized below depot level.

C- Indicates a change in data.

L-

Reparable item.

Repair, condemnation, and

R- Indicates a change in NSN only.

disposal not authorized below depot/specialized

repair activity level.

5. How to Locate Repair Parts

c. National Stock Number. Indicates the National

a. When National Stock Number or Part Number is

stock number assigned to the item and will be used for

Unknown:

requisitioning purposes.

(1) First. Using the table of contents, determine the

d. Part Number. Indicates the primary number used

functional group or subgroup within which the repair part

by the manufacturer (individual, company, firm,

belongs.

This is necessary since illustrations are

corporation, or Government activity), which controls the

prepared for functional groups or subgroups, and listings

design and characteristics of the item by means of its

are divided into the same groups.

engineering drawings, specifications standards, and

(2) Second. Find the illustration covering the

inspection requirements, to identify an item or range of

functional group or subgroup to which the repair part

items.

belongs.

NOTE

(3) Third. Identify the repair part on the illustration

When a stock-numbered item is requisitioned,

and note the illustration figure and item number of the

the repair part received may have a different part

repair part.

number than the part being replaced.

(4)Forth. Using the Repair Parts Listing, find the

e. Federal SuppIy Code for Manufacturer (FSCM).

figure and item number noted on the illustration.

The FSCM is a 5-digit numeric code listed in SB 708-42

b. When National Stock Number or Part Number is

which is used to identify the manufacturer, distributor, or

Known:

Government agency, etc.

(1) First.

Using the Index of National Stock

f. Description. Indicates the Federal item name and,

Numbers and Part Numbers, find the pertinent National

if required, a minimum description to identify the item.

stock number or part number. This index is in ascending

g. Unit of Measure (UIM). Indicates the standard of

NSN sequence followed by a list of part numbers in

the basic quantity of the listed item as used in performing

ascending alphanumeric sequence, cross-referenced to

the actual maintenance function. This measure is

the illustration figure number and item number.

expressed by a two-character alphabetical abbreviation

(2) Second. After finding the figure and item

(e.g., ea, in, pr, etc.). When the unit of measure differs

from the unit of issue, the lowest unit of issue that will

satisfy the required units of measure will be

requisitioned.

Change 1 4