Section I. INTRODUCTION - TM-11-5895-532-20P0003

TM 11-5895-532-20P

SECTION I

INTRODUCTION

Code

Definition

1. Scope

PD-Support item, excluding support equipment, procured

This manual lists repair parts required for the

for initial issue or outfitting and stocked only for

performance of organizational maintenance of the

subsequent or additional initial issues or

AN/TPX-46(V) 1, 2, 3, 4, and 6.

outfittings.

Not

subject

automatic

replenishment.

2. General

XD-A support item that is not stocked. When required,

This Repair Parts and Special Tools List is divided into

item will be procured through normal supply

the following sections:

channels.

a. Section II. Repair Parts List. A list of repair parts

NOTE

authorized for use in the performance of maintenance.

Cannibalization or salvage may be used as a

The list also includes parts which must be removed for

source of supply for any items source coded

replacement of the authorized parts. Parts lists are

above except those coded XA, XD, and aircraft

composed of functional groups in ascending numerical

support items as restricted by AR 700-42.

sequence, with the parts in each group listed in figure

(2) Maintenance code. Maintenance codes are

and item number sequence.

assigned to indicate the levels of maintenance

b. Section III. Special Tools List. Not applicable.

authorized to USE and REPAIR support items. The

c. Section IV. National Stock Number and Part

maintenance codes are entered in the third and fourth

Number Index. A list, in ascending numerical se-quence,

positions of the Uniform SMR Code format as follows:

of all National stock numbers appearing in the listings,

(a) The maintenance code entered in the third

following by a list, in alphanumeric sequence, of all part

position will indicate the lowest maintenance level

numbers appearing in the listings.

National stock

authorized to remove, replace, and use the support item.

number and part numbers are cross-referenced to each

The maintenance code entered in the third position will

illustration figure and item number appearance.

indicate one of the following levels of maintenance:

3. Explanation of Columns

Code

Application/Explanation

The following provides an explanation of columns found

O-Support item is removed, replaced, used at the

in the tabular listings:

organizational level.

a. Illustration. This column is divided as follows:

(b) The maintenance code entered in the fourth

(1) Figure number. Indicates the figure number of

position indicates whether the item is to be repaired and

the illustration in which the item is shown.

identifies the lowest maintenance level with the capability

(2) Item number. The number used to identify

to perform complete repair (i.e., all authorized

each item called out in the illustration.

maintenance functions). This position will contain one of

b. Source, Maintenance, and Recoverability Codes

the following maintenance codes:

(SMR).

(1) Source code. Source codes are assigned to

Code

Applicationl/Explanation

support items to indicate the manner of acquiring support

O--The lowest maintenance level capable of complete

items for maintenance, repair, or overhaul of end items.

repair of the support item is the organizational level.

Source codes are entered in the first and second

F-The lowest maintenance level capable of complete

positions of the Uniform SMR Code format as follows:

repair of the support item is the direct support level.

H-The lowest maintenance level capable of complete

Code

Definition

repair of the support item is the general support level.

A-Item procured and stocked for anticipated or known

D-The lowest maintenance level capable of TM 11-5895-

usage.

532-20P

B--Item procured and stocked for insurance purpose

because essentiality dictates that a minimum quantity be

available

the

supply

systems.