|
| a. Removal
(1) Position Radio Set in upright position.
(2) Lift up on each snap fastener lever until it snaps open.
(3) Lift up on each snap fastener lever and pull away from the catch on the R/T unit.
(4) Lift up on R/T unit while gently shaking until R/T unit separates from battery power supply.
b. Installation
(2) Ensure pull ring is flat against top of insert as shown
(3) Align R/T unit directly over battery power supply with bottom toward you.
(4) Slowly lower the R/T unit onto the battery power supply
(5) Gently press down on the R/T unit handles until the power plugs are fully seated
(6) Position snap fastener latches over catches on R/T unit
3-12
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |