|
| SPKR/MODE (4)
PT for plain text and speaker use
PT OFF for plain text and handset use
CT for use with COMSEC equipment
NOTE
Squelch control circuits of the receiving unit are used to select transmit mode of
the other unit. Thus, if either R/T2 or R/T3 squelch is misadjusted, the radios may
not function properly.
f.
Adjust the squelch of R/T2 and R/T3 one at a time as follows:
(1) Set PWR switch (15) to up (on)
(3) Slowly adjust SO control (6) until noise is barely turned off.
(4) After both squelch controls have been adjusted, set PWR switch (15) to OFF.
2-30
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |