|
| TM 11-5895-1141-34
CHAPTER 4
MAINTENANCE INSTRUCTIONS FOR CONTROL, RADIO CHANNEL C-10931(P)/FRC
Section I. GENERAL INFORMATION
SECTION CONTENTS
Page
Introduction..............................................................................................................................
Common Tools and Equipment ...............................................................................................
Special Tools and Test Equipment..........................................................................................
Repair Parts.............................................................................................................................
4-1. INTRODUCTION
Repair of the equipment consists of replacing and repairing damaged or malfunctioning components found during
preventive maintenance checks and services or troubleshooting procedures. Removal of assemblies or components is
performed only to the extent necessary to accomplish the required repairs. Refer to the Maintenance Allocation Chart
(MAC) given in TM 11-5895-1141-12 to determine the level of responsibility for maintenance functions. Refer to the
Repair Parts and Special Tools List in TM 11-5895-1141-34P to determine support items required to operate and maintain
the C-10931(P)/FRC. Table 4-1 lists the required parts and test equipment needed for the maintenance procedures
described in this chapter.
4-2. COMMON TOOLS AND EQUIPMENT
For authorized common tools refer to the Maintenance Allocation Chart in TM 11-5895-1141-12.
4-3. SPECIAL TOOLS AND TEST EQUIPMENT
No special tools are required for maintenance of the radio channel control equipment. The MTS-2400 module test set is
used to test the modules of the radio channel control equipment. Procedures for the use of the module test set are
contained in this chapter.
4-4. REPAIR PARTS
Repair parts are listed and illustrated in the Repair Parts and Special Tools List covering this equipment.
4-0
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |