Appendix J. AN/VIC-3(V) TRAINING INTERFACE DEVICES

TM 11-5830-263-20&P

APPENDIX J

AN/VIC-3(V) TRAINING INTERFACE DEVICES

J-1

SCOPE

This appendix lists items designed to interface with existing training device(s) and the Intercommunication

Set, Vehicular AN/VIC-3(V).

GENERAL

The items identified herein are for reference only, and are not part of the operating system for the

Intercommunication Set, Vehicular. These Cables and Adapter are used between existing training

devices and the VIS LRU(s). Each cable and/or adapter is used to interface to a specific training device,

as identified in paragraph J3.

J-3

DESCRIPTION OF INTERFACE DEVICE

a. Part number. A3210696, NAME: MILES/TWGSS/PGS Adapter board. This Adapter is required

when the Multiple Integrated Laser Engagement System (MILES), the Tank Weapons Gunnery

Simulator System (TWGSS) or the Precision Gunnery System (PGS) training devices are to be

used.

b. Part Number. A3210697, NAME: Radio-SAWE Vehicular Intercom System, Cable Assy., Special

Purpose Electrical. This Cable is required only when interface to the Situation Awareness and

Weapons Effect (SAWE) is to occur.

Part Number. A3210698, NAME: AN/VIC-3 Radio Interface Cable to SAWE MILES Trainer. This

Cable is required when the SINCGARS Radio is to be controlled by the SAWE MILES Radio

Control Device, each SINCGARS Radio will require an Interface Cable.

d. Part Number. A3210699, NAME AN/VIC-3 Interface Cable Assy. To Thru-Sight Video. This Cable

is required to exchange audio between the Thru-Sight Video (TSV) training system and the

AN/VIC-3 Intercom.

e. Part Number. A3210695, NAME AN/VIC-3 Interface Cable Assy. To SINCGARS Radio (jump-

radio cable). This Cable is used for Operator training where voice transmissions are recorded.

J-1/(J-2 blank)