Section I. INTRODUCTION - TM-11-5830-263-20-P0140

TM 11-5830-263-20&P

SECTION I

INTRODUCTION

C-1

SCOPE

This manual lists and authorizes spares and repair parts; special tools; special test, measurement, and

diagnostic equipment (TMDE); and other special support equipment required for the performance of Unit

Maintenance of the AN/VIC-3(V)1 through AN/VIC-3(V)18. It authorizes the requisitioning, issue and

disposition of spares, repair parts and special tools as indicated by the source, maintenance and

recoverability (SMR) codes.

C-2

GENERAL

In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following

sections:

a. Section II, Repair Parts List. A list of spares and repair parts authorized by the RPSTL for use in

the performance of maintenance. This list also includes parts that must be removed for

replacement of the authorized parts. Parts lists are composed of functional groups in ascending

alphanumeric sequence, with the parts in each group listed in ascending item number sequence.

Figure numbers are listed directly beneath the group header. Bulk materials are listed in item

name sequence. Repair part kits are listed separately in their own functional group within Section

II. Repair parts for repairable special tools are also listed in this section. Items listed are shown on

the associated illustration.

b. Section III, Special Tools List. Not applicable. There are no special tools required in the

maintenance of the AN/VIC-3(V) 1 through AN/VIC-3(V)18.

Section IV, Cross Reference Indexes. A list, in National item identification number (NIIN)

sequence, of all National stock numbered items appearing in the listing, followed by a list in

alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and

part numbers are cross-referenced to each illustration figure and item number appearance. The

figure number and item number index lists figure and item numbers in numeric sequence and

cross-references National stock number, Commercial and Government Entity Code and part

numbers.

C-3

EXPLANATION OF COLUMNS (Section II and III)

a. Item No. (Column 1). Indicates the number used to identify items called out in the illustration.

b. SMR Code (Column 2). The source, maintenance, and recoverability (SMR) code is a five position

code containing supply/requisitioning information, maintenance category authorization criteria and

disposition instruction, as shown in the following breakout:

C-2