LOUDSPEAKER KNOB AND MOUNTING HARDWARE REMOVAL AND REPLACEMENT PROCEDURES

TM 11-5830-263-20&P

3.12.

LOUDSPEAKER KNOB AND MOUNTING HARDWARE REMOVAL AND REPLACEMENT

PROCEDURES (Fig. 3-29)

Figure 3-29. Loudspeaker Assembly

3.12.1. Loudspeaker Knob Removal and Replacement Procedure

The Knob removal and Replacement Procedures for the loudspeaker are the same as those given in the

previous paragraph (3.11) for the MCS, FFCS AND MOS, with the exception that a cross head

screwdriver is to be used.

3.12.2. Loudspeaker Mounting Hardware Removal and Replacement Procedure

a. Removal

Remove wing nut (1) by turning counter-clockwise and slide lock washer (2) and flat washer (3)

off threaded shaft (4).

b. Replacement

Slide flat washer (3), lock washer (2) on threaded shaft (4), then place wing nut (1) on threaded

shaft (4) and tighten by turning clockwise.