Overhelmet Strap Assembly Removal and Replacement (Fig. 3-20)

TM 11-5830-263-20&P

3.9.2.

Overhelmet Strap Assembly Removal and Replacement (Fig. 3-20)

Figure 3-20. Overhelmet Strap Assembly

NOTE

The overhelmet strap assembly consists of two Velcro strap sections, hooks and loops.

When replacing a single strap at a time make sure the replacing strap is the same as the

one being removed.

a. Removal

Using a cross-tipped screwdriver remove screw (1) and anchor washer (2) securing overhelmet strap

(3) to earcup assembly (4).

CAUTION

DO NOT USE THREAD SEALANT OR LOCKING COMPOUND. DOING SO COULD

CAUSE DAMAGE TO THE EARCUPS ASSEMBLY.

b. Replacement

Place screw (1) and anchor washer (2) through opening in end of overhelmet strap (3) and use a

cross-tip screwdriver to secure to earcup assembly (4).