Helmet Liner Insert Removal and Replacement Procedures (Fig. 3-15)

TM 11-5830-263-20&P

3.8.5

Helmet Liner Insert Removal and Replacement Procedures (Fig. 3-15)

Figure 3-15. Helmet Liner Inserts

a. Removal

1. Locate insert(s) (2 through 6) to be removed. Grasp liner (1) in one hand and place fingers

beneath the insert at the opening provided in the liner pouch. Carefully free one end of the

insert (2 through 6) from the liner pouch.

2. Reverse liner (1) in hand and grasp the insert (2 through 6). Carefully free other end from the

liner pouch.

b. Replacement

1. Grasp liner (1) in one hand. Carefully feed one end of insert (2 through 6) into liner pouch

opening until end is fully installed.

2. Reverse liner (1) in hand and feed the other end of insert (2 through 6) into liner pouch

opening until insert is fully installed.

3. Smooth out any wrinkles or bumps in the liner until insert is fully secured.