Windscreen and O-Ring Removal and Replacement (M-175/VRC, Fig. 3-13)

TM 11-5830-263-20&P

3.8.3.

Windscreen and O-Ring Removal and Replacement (M-175/VRC, Fig. 3-13)

M-175/VRC

(PICVC)

Figure 3-13. Microphone, Boom, and Cable Assembly

a. Removal

1. Grasp O-ring (2) between thumb and forefinger and slide O-ring (2) and windscreen (3) off

microphone (1).

2. Separate O-ring (2) from windscreen (3).

CAUTION

WHEN PLACING WINDSCREEN/O-RING ON MICROPHONE BE CAREFUL NOT TO

TEAR WINDSCREEN.

b. Replacement

1. Compress closed end of windscreen (3) and place inside O-ring (2) until O-ring (2) is midway

on windscreen (3).

2. Slide O-ring (2)/windscreen (3) onto microphone (1) and adjust O-ring (2) until windscreen (3)

is secured.