|
| |
TM 11-5821-333-12
6-32. OPERATIONAL CHECK.
Use the following procedure to check the operation of the ECCM fill device. If it passes the operational check,
return it to the user.
NOTE
The TRANSEC variable is used with Non-lCOM radio sets only.
ACTION
RESPONSE
Load and Transfer Check
a. Load hopset, lockout set, and TRANSEC vari-
a. Light on ECCM fill device blinks when data is
able (if used) into ECCM fill device using
transferred. If not, go to troubleshooting flow
another ECCM fill device.
chart.
b. Transfer hopset, lockout set, and TRANSEC
b. Light on ECCM fill device blinks when data is
variable (if used) to an RT or another ECCM
transferred. If not, go to troubleshooting flow
fill device.
chart.
6-33. MAINTENANCE PROCEDURE.
This task covers:
Assembly/Disassembly
INITIAL SETUP
Tools
Tool Kit, Electronic Equipment, TK-101/G
WARNING
The lithium battery used in your ECCM fill device is hazardous if
misused or tampered with before, during, or after discharge.
CAUTION
The ECCM fill device is protected from RFI, EMI,
and EMP. Carefully replace screws and covers.
6-55
|
