|
| TM 11-5821-285-30P
Code
Application Explanation
h. Quantity Incorporated in Unit. Indicates the
L- Repair restricted to designated specialized repair
quantity of the item used in the breakout shown on the
activity.
illustration figure, which is prepared for a functional
Z- Nonreparable. No repair is authorized.
group, subfunctional group, or an assembly. A "V"
(3) Recoverability code. Recoverability codes are
appearing in this column in lieu of a quantity indicates
that no specific quantity is applicable, (e.g., shims,
assigned to support items to indicate the disposition
spacers, etc).
action on unserviceable items. The recoverability code is
entered in the fifth position of the Uniform SMR Code
4. Special Information
format as follows:
a. Usable on codes are shown in the description
column. Uncoded items are applicable to all models.
Recoverability
Identification of the usable on codes used in this
codes
Definition
publication are:
Z- Nonreparable item. When unserviceable, condemn
Code
Used on
and dispose at the level indicated in position 3.
EZ3
AN/ASC-15A(V)1
F-- Reparable item. When uneconomically reparable,
EZ4
AN/ASC-15A(V)2
condemn and dispose at the direct support level.
b. Detailed manufacturing instructions for items
D- Reparable item. When beyond lower level repair
source coded to be manufactured or fabricated are found
capability, return to depot.
Condemnation and
in TM 11-5821-285-34.
Bulk materials required to
disposal not authorized below depot level.
manufacture items are listed in the Bulk Material Group
L- Reparable item. Repair, condemnation, and disposal
of this manual.
not authorized below depot/specialized repair activity
c. Detailed assembly instructions for items
level.
source coded to be assembled are found in TM 11-5821-
c.
National Stock Number.
Indicates the
298-34. Assembly components are listed immediately
National stock number assigned to the item and will be
following the item to be assembled.
used for requisitioning purposes.
d. The following publications pertain to the AN/
d.
Federal Supply Code for Manufacturer
ASC-15A(V)1
and
AN/ASC-15A(V)2
and
their
(FSCM). The FSCM is a 5-digit numeric code listed in
components:
SB 708-41/42 which is used to identify the manufacturer,
TM 11-1520-207-20P, Installation Items for Electronic
distributor, or Government agency, etc.
Equipment in UH-1A, UH-1B and UH-1D Helicopters.
e. Part Number. Indicates the primary number
TM 11-1520-207-35P, Installation Items for Electronic
used by the manufacturer (individual, company, firm,
Equipment in UH-1A, UH-1B and UH-1D Helicopters.
corporation, or Government activity), which controls the
TM
11-1520-210-20,
Electronic
Equipment
design and characteristics of the item by means of its
Configurations, Army Models UH-LD, UH-1H and
engineering drawings, specifications, standards, and
EH-1H Helicopters.
inspection requirements to identify an item or range of
TM 11- 1520-210-20-1, Electronic Equipment Con-
items.
figurations,
Army Model
UH-1H
Helicopter
(W/Standard Lightweight Avionics Equipment).
NOTE
TM 11-1520-210-20P, Electronic Equipment Con-
When a stock numbered item is
figuration, Army Model UH-1D and UH-1H
requisitioned, the repair part received
Helicopters.
may have a different part number than
TM
11-1520-210-20P-1,
Electronic
Equipment
the part being replaced.
Configuration, Army Model UH-1H (With SLAE).
f. Description. Indicates the Federal item name
TM 11-1520-210-34-1, Electronic Equipment Con-
and, if required, a minimum description to identify the
figuration, Army Model UH-1H Helicopter (With
item.
Standard Lightweight Avionics Equipment).
g.
Unit of Measure (U/M).
Indicates the
TM 11-1520-210-35, Electronic Equipment Configuration,
standard of the basic quantity of the listed item as used
Army Models UH-1D Helicopter UH-1H and EH-1H.
in performing the actual maintenance function. This
TM
11-1520-211-20,
Electronic
Equipment
measure is expressed by a two-character alphabetical
Configurations, Army Models UH-1B and UH-1C/M
abbreviation (e.g., ea, in, pr, etc). When the unit of
Helicopters.
measure differs from the unit of issue, the lowest unit of
issue that will satisfy the required units of measure will be
requisitioned.
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |