Special Information - TM-11-5821-260-34P-10006

TM 11-5821-260-34P-1

the item. Items that are included in kite and sets are

(b) The maintenance code entered in the fourth

listed below the name of the kit or set with the

position indicates whether the item is to be repaired

quantity of each item in the kit or set indicated in the

and identifles the lowest maintenance level with the

quantity incorporated in unit column.

capibility to Perform complete repair (i.e., all autho-

g. Unit of Mauure (U/M). Indicates the standard

rized maintenance functions). This position will con-

of the basic quantity of the listed item as used in

tain one of the following maintenance Codes:

Application/Explanation

Code

performing the actual maintenance function. This

H--The lowest maintenance level capable of complete

measure is expressed by a two-characteralphabetical

repair of the support item is the general support

abbreviation (e.g., ea, in, pr, etc). When the unit of

level.

measure differs from the unit of issue, the lowest unit

D-The lowest maintenance level capable of complete

of issue that will satisfy the required units of measure

repair of the support item is the depot level.

will be requisitioned.

Z-Nonreparable. No repair is authorized.

h. Quantity Incorporated in Unit. Indicates the

(3) Recoverability Code. Recoverability codes are

quantity of the item used in the breakout shown on .

assigned t0 support items toindicate the disposition

the illustration figure, which is prepared for a func-

action on unserviceable items. The recoverability

tional group, subfunctional group, or an assembly.

Code is entered in tbe fifth position of tbe uniform

SMR Code format as follows:

4. Spocial Information

Definition

Z-Nonreparable item. When unserviceable, c o n -

a. Detailed assembly instructions for items source

demn and dispose at the level indicated in position

coded to be assembled are found in TM 11-5821-260-

34-1 (to be published). Assembly components are

listed immediately following the item to be

Irreparable item. When beyond lower level repair

assembled.

capability, return to depot. Condemnation and

disposal not authorized below depot level.

b. The following publications pertain to the AN/

L-Reparable item. Repair, condemnation, and dis-

ARC-115A(V)1 and its components:

posal not authorized below depot/specialized repair

(1) TM 11-5821-260-12-1, Radio Set AN/ARC-

activity level.

115A(V)1.

A--Item requires special banding or condemnation

(2) TM 11-5821-260-20P-1, Radio Set AN/ARC-

procedures because of specific reasons (i.e., pre-

115A(V)1.

cious metal content, high dollar value, critical

(3) TM 11-6821-260-34-1, Radio Set AN/ARC-

material or hazardous material). Refer to appropri-

115A(V)1 (to be published).

ate manuals/directives for specific instructions.

c. National stack numbers (NSN'S) that are missing

c. National Stock Number. Indicates the National

from P source coded items have been applied for and

stock number assigned to the item and will be used

will be added to this TM by future change/revision

for requisitioning purposes.

when they are entered in the Army Master Data File

d. Part Number. Indicates the primary number

(AMDF). Until the NSN'S are established and pub-

used by the manufacturer (individual, company, firm,

lished, submit exception requisitions to: Commander,

corporation, or Government activity), which controls

US Army Communications and Electronics Materiel

the design and characteristics of the item by means of

Readiness Command, ATTN: DRSEL-MM, Fort

its engineering drawings, specifications, standards,

Monmouth, NJ 07703 for the part required to support

and inspection requirements to identify an item or

your equipment.

range of items.

NOTE

When a stock numbered item is requis-

5. How to Locate Repair Parts

itioned, the repair part received may have a

a. When National stock number or part number is

different part number than the part being

unknown.

replaced.

(1) First. Using the table of contents, determine

the functional group within which the item belongs.

e. Federal Supply Code for Manufacturer (FSCM).

The FSCM is a 5-digit numeric code listed in SB 708-

This is necessary since illustrations are prepared for

42 which is used to identify the manufacturer, distrib-

functional groups and listings are divided into the

same groups.

utor, or Government agency, etc.

f. Description. Indicates the Federal item name

(2) Second. Find the illustration covering the

functional group to which the item belongs.

and, if required, a minimum description to identify