Figure 2-2. Typical Equipment for Aircraft Installation.

TM 11-5820-917-13

2-12. The aircraft installation kit P/N 9125-1907, consists of the following items

which are keyed to figure 2-2.

Item

Qty

BR part number

Power Divider, 2 way

0950-8383

Low Pass Filter, 30 MHz

0951-0035

Attenuator, 25 W, 10 dB

0950-0049

Resistor, RF Termination, 25 W 50 ohm

0950-8080

Cable Assy, N to N

8120-2006-12

Cable Assy, N to N

8120-2006-600

Cable Assy, N to N

8120-2006-36

Cable Assy, TNC to N

8120-2006-36

Adapter, Connector, TNC/N

1250-0066

Typical Equipment for Aircraft Installation.

2-13. ENVIRONMENTAL CASE ENCLOSURE. The RCS-4B receiver is supplied in an

environmental case. This configuration is particularly suitable for shock or vibration

prone environments. The container comes complete with four carrying handles;

however, because of the weight of the assembled receiver, a forklift should be used

or the modular units removed from the case before moving the receiver. Front and

rear doors on the case remove easily for access to equipment. The external dimensions

and weight of the unit are shown on figure 2-3.

2-14. POWER CONNECTION

The receiver may be operated from either

115 or 230 volts

LINE VOLTAGE.

A toggle switch mounted in the

4028 unit adjacent

to the power transformer (figure 2-4) permits easy conversion for

either voltage.

Access to the switch is obtained by removing the top cover of the

4028 unit.

2-3