|
| TM 11-5820-917-13
Specifications
2-16 MHz and 2-30 MHz, selectable
Frequency Range
(Sweep Limits)
by front panel switch
Linear FM/CW
Input Waveform
Sweep Rates
50 kHz/sec in 2-16 range. 100
kHz/sec in 2-30 MHz range
Automatic sweep start at any of 12
Operating Times
times spaced 5 minutes apart, each
hour, for any of three paths. Sweep
can be manually initiated, terminated,
or reset at any time.
-9
Long-Term Timing and
Less than 5 x 10 /24 hours after 12
Frequency Accuracy
hours warmup
24 hours, minimum, for timing
Standby Power
circuitry (at 23C)
Sufficient to obtain a nominal
Sweep Linearity
100 microsecond or better time-
delay resolution
Time Delay Window
5 msec (100 kHz/see sweep); 10 msec
100 microseconds nominal, (50 kHz/
Time Delay Resolution
sec sweep)
Synchronization
Manual/automatic search and lock-
on of signal when receiver is started
within
second of the transmit-
ter.
50, 10, or 1 msec/sec advance
Manually Controlled
Timing Slip
or retard, independent for each of
three paths
CRT bargraph of received signal power
RF Signal Level Display
over 55 dB range
dB) starting from
-120 dBm (excluding 6043 loss) versus
frequency.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |