|
| |
TM 11-5820-890-30-5
15-29.
Tools:
REPLACEMENT OF WIRES.
Cross tip screwdriver
Soldering kit
Diagonal cutting pliers
Long nose pliers
Soldering aid
Heat sink
Wire strippers
Expendable Supplies:
Solder
Cotton swabs
Tiedown straps
Alcohol
Connectors
Wire
References:
Paragraph 15-20 for removal and installation of mounting plate assembly.
ITEM
ACTION
REMARKS
REMOVAL
a. Mounting plate
Remove and retain.
Refer to paragraph 15-20
assembly (2)
for removal of mounting
plate assembly.
b. Battery tray
Set upside down on work surface with
subassembly (1)
left side toward you.
c. Wire(s) (2) and tiedown
Use long nose pliers and soldering equip-
straps (1)
ment. Desolder both ends of defective
wire (s) to be replaced. Cut, remove, and
discard tiedown strap(s) along wire(s).
See figure 15-6.
Remove and discard defective wire (s).
d. Wire(s) (2)
Figure 15-6.
Battery Tray Subassembly (Bottom View) With Internal Wiring Harness.
15-32
|
