|
| |
TM 11-5820-890-30-5
15-18. VISUAL INSPECTION OF BATTERY TRAY ASSEMBLY.
Before beginning any maintenance procedure, inspect the battery tray assembly for physical damage. Use the
following table as a guide to inspect the assembly. Look for damaged or missing parts, and replace them as
required. The external parts are shown in figure 15-3.
ITEM
ACTION
REMARKS
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
12A1 battery tray
subassembly (1)
Mounting plate
assembly (2) and
attaching hardware
Battery tray gasket
J1 connector (4) and
attaching hardware
P1 connector (5) and
attaching hardware
S1 pushbutton switch (6)
and attaching hardware
Seal screw (7)
DS1 lamp holder (8) and
attaching hardware
Battery tray case (9)
Battery box gasket (10)
Check for damage and tight connection
to mounting plate assembly.
Check for damage.
Check for cuts, tears, and improper
seating.
Check for bent/broken pins and tight
connection to battery tray case.
Check for bent/broken pins and tight
connection to battery tray case.
Check for damage and tight
connection to battery tray case.
Check for a tight seal to battery
tray case.
Check for damage and tight
connection to battery tray case.
Check for damage such as a broken
connector.
Check for cuts, tears, and improper
seating.
If defective, proceed to
paragraph 15-19.
If defective, proceed to
paragraph 15-20.
If defective, proceed to
paragraph 15-21.
If defective, proceed to
paragraph 15-26.
If defective, proceed to
paragraph 15-23.
If defective, proceed to
paragraph 15-32.
If defective, proceed to
paragraph 15-31.
If defective,
paragraph
If defective,
paragraph
proceed to
15-30.
proceed to
15-33.
If defective, proceed to
paragraph 15-34.
Figure 15-3. Battery Tray Assembly (Top View) With Mounting Plate Assembly.
15-19
|
