|
| |
TM 11-5820-890-30-5
4-40. REPLACEMENT OF BOTTOM COVER.
Tools:
Cross tip screwdriver
ITEM
ACTION
REMARKS
REMOVAL
a. Mounting adapter
Set upside down on work surface with
power supply chassis toward you.
b. Bottom cover (13)
Using cross tip screwdriver, remove and
See figure 4-11.
retain 18 screws (11) and flat washers
(12) securing defective bottom cover
(13) to power supply chassis (15).
Remove bottom cover.
c. Gasket (14)
INSTALLATION
d. Gasket (14)
e. Bottom cover (13)
Remove and inspect gasket (14), replace
gasket if required. Discard bottom
cover (13).
Position retained gasket (14) to
replacement bottom cover (13).
Using cross tip screwdriver, install 18
retained screws (11) and flat washers
(12) securing bottom cover (13) to
power supply chassis (15).
This was removed in
step c.
These were removed in
step b.
4-141
|
